Motorised Touch Bar PHTM5

Motorised device can be used with a variety of access entry systems such as digital keypad, proximity reader or swipe card system to allow controlled access from outside. The panic touch bar will always override this and be operable from inside to allow safe egress.

Motorised three point touch bar bolt for use on a single door (timber, metal or PVCu), the inactive leaf of a pair of rebated doors or both leaves of a pair of straight edged doors.

Comprises a touch bar containing a motor, modular mechanism and covered connecting rods and vertical latching pullman latches at the top and bottom. Motor operates on 12-24v DC (stabilised) or 12v AC. 2 amp power supply.

The centre mechanism can be blanked off with plate supplied to convert it into a two point device when using it on double doors.

Can be supplied with dogging but not supplied as standard.  The dogging (hold-back) facility should not be used on fire/smoke door assemblies but fine for escape doors. If dogging is required please state when ordering.

Standard size - 840mm suitable for doors up to 860mm wide, longer version - 1170mm for wider doors available.  Suits doors up to 2585mm high as standard, longer rods are available to suit doors up to 3150mm high.

Micro-switch can be fitted in the mechanism, this allows the door to be fitted to equipment that monitors the door status. If required state when ordering.

Supplied with strikers for timber or metal doors as standard - strikers for PVCu available separately.

Optional outside access devices are available to provide entry from outside.

Tested and certified to EN 1125:2008 - classification 3-7-7-B-1-4-2-2-B-A

CE Marked

Certifire approved 120 minutes (Certificate CF5394)

Two year warranty (conditions apply)